Sound1.com
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Briteq Dms-26 Merger/splitter/booster, 2 In / 6 Out

Art.nr: 04625-BE
7.115,-
Antall:

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Briteq
Leverandørlager. 5-7 virkedager til lager
  • The perfect all-in-one solution to secure your DMX-installations: MERGER + SPLITTER + BOOSTER
  • 100% electrical isolation between all in/outputs!
  • 2 DMX-inputs + 6 DMX-outputs, each equipped with 3pin and 5pin XLR-connectors.
  • The booster function analyses the incoming DMX-signal and builds it back up from scratch to make it perfect for further use.
  • The merger function combines 2 DMX-signals in different ways:
    • HTP: the highest value of 2 identical channels from 2 DMX-signals will have priority.
    • Backup: when the DMX-signal on input A fails, the DMX-signal in input B takes over immediately.
    • Merger: DMX-signals from 2 different controllers can be combined and send over 1 cable, you can choose the start address of the second controller.
  • The splitter function distributes the DMX-signal(s) from the input(s) over 6 identical outputs that are 100% isolated from each other: problems that occur on 1 output will not influence the other outputs!
  • The timing of the DMX-outputs can be adapted from 23ms to 45ms, increasing compatibility while connecting “slow" DMX-devices to “fast" DMX-controllers.
  • Output behavior can be selected when suddenly both DMX-inputs fail:
  • Null: no DMX signal on the outputs
  • Hold: keep the last DMX values on the outputs.
  • Clear: set the DMX values on all outputs to zero.
  • Easy setup via 4digit LED display

Technical Information

  • Power Input: 230Vac / 50Hz.
  • DMX in/outputs: 3pin + 5pin XLR
  • DMX refresh rate: 23ms (44Hz) to 45ms (22Hz)
  • Size: 482 x 44 x 150mm (19"/1U)
  • Weight: 2,9kg

Trykk ENTER for å søke