Sound1.com
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Enttec DMX Playback MK2 Recorder

Art.nr: 70014-EC
3.895,-
Antall:

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Leverandørlager. 5-7 virkedager til lager

With this unit, you can record and store a light show, then let the unit playback the show for as long as you like. The DMXPlayBack MK2 is perfect for unattended light shows or demonstrations that run continuously. The unit can store up to 500 static scenes per show.

A show can be programmed to start: when the unit is powered, or an external trigger via RS232 can start/stop a show.

You could even control the PlayBack from any RS232 capable device: show control system, Hyper Terminal, basic stamp ... (check the communication protocol in the download section for a complete set of commands).

Clients have also used the DMXPlayBack MK2 with a more sophisticated control systems such as AMX™ systems, where multiple DMXPlayBacks were used to ouput DMX512 pre recorded scenes. Loading and fading of the scenes were commanded from RS232.

The DMXPlayBack Mk2 also offers REALTIME control of your lighting fixtures, when you change a parameter on the PalmPilot or PC the changes occur on the DMX ouput too. You can use it as a debugging tool.

Major Features

 

  • Scene capture from the DMX512 input
  • Up to 12 Shows
  • Up to 65,535 Scenes per Show
  • Fade times and delay times (0 to 100 minutes in 0.1sec steps)

 

Package Contents

 

  • DMXPlayBack MK2 Unit
  • PC Serial Port Cable (DB9 to DB9 Connector)
  • Software
  • User manual

Trykk ENTER for å søke