Sound1.com
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Ampetronic C10-1N Teleslyngeforsterker 10A output 1 kanal, med nettverk

Art.nr: C10-1N
23.619,-
Antall:

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Ampetronic
ta kontakt for pristilbud

  • Enkelt digitalt grensesnitt for nøyaktig justering

    Nettverk og frittstående alternativer

    Innebygde testtoner

    Kompatibel med Loopworks Measure LoopLink for direkte og automatisert førerkontroll

    Tydelige indikatorer og systemdiagnostikk

    Kompakt 1U stativmontert enhet med intern strømforsyning

    Optimalisert for talefrekvenser med uovertruffen forståelighet og i stand til høykvalitets musikalsk gjengivelse

    Bransjestandard Phoenix-kontakter

    Data i samsvar med IEC 62489-1 Standard

    100V linjeinngang

INPUTS

Input 1 & 23 way 3.5mm euroblock screw terminal input (supplied) with a balanced microphone and line level operation, selectable via rear panel switch. Switchable 250Hz low cut filter. Priority input option (network models only).

Microphone / LineMicrophone specification; 200 – 600Ω, sensitivity -67dBu. Selectable 24V phantom power on microphone only Line sensitivity -42dBu. Max line level 17Bu. Max mic level -8dBu.

100V Line (Input 2 only)2 way 5mm euroblock screw terminal (supplied) Sensitivity +7dBu

Dante (Optional C5/C7)RJ45 Ethernet, control and monitoring. Hosted web server, Telnet & SNMP.

OUTPUTS

Loop Connectors4 way 5mm euroblock screw terminal (supplied) for each output, for twisted pair or star-quad configured feed cables

DC Output*2 way 3.5mm euroblock screw terminal (supplied). Re-settable, fuse protected 12V 0.1A. Controllable to reflect amplifier status (network models only)

Status Relay (C10 and C14)2 way 3.5mm euroblock screw terminal (supplied). Normally closed isolated relay contacts, open in fault conditions. Rated load 0.5A at 125VAC, 2A at 30VDC.

Line Output3 way 3.5mm euroblock screw terminal (supplied) post AGC balanced output

USB* Firmware updates or power for wireless router (200mA max).

*Note powering an external device via DC out or USB may reduce power headroom available for the loop. DC Output and USB power should not be used simultaneously.

ModelCurrentVoltagePower ConsumptionWeight

C5-15ARMS (7.1 Apk) 1kHz sine 2.4ARMS pink20VRMS (28.3Vpk)35W2.5kg

C5-255W2.8kg

C7-17ARMS (9.9 Apk) 1kHz sine 3.3ARMS pink55W2.8kg

C7-295W3.1kg

C10-110ARMS (14.1 Apk) 1kHz sine 4.7ARMS pink33.9VRMS (48Vpk)70W (mains voltage switchable)4.2kg

C10-2120W (mains voltage switchable)5.2kg

C14-214ARMS (19.8 Apk) 1kHz sine 6.6ARMS pink48.1VRMS (68Vpk)180W (mains voltage switchable)6.7kg

THERMAL HEAT CHART

https://www.ampetronic.com/loop-driver-thermal-heat-chart/

 

AUDIO SYSTEM

Frequency Response80Hz to 6.5kHz

DistortionTHD+N <0.3% 1kHz sine at full current

Automatic Gain ControlThe AGC is optimised for speech. Dynamic range >36dB

Metal Loss CorrectionCorrects system frequency response issues due to metal structures in a building. Gain constant at 1kHz, adjustable gain slope from 0 to 4dB per octave in 0.25dB increments. Custom dual slope MLC allows different slopes and knee frequency to be set via the menu (network models only). This does not compensate for signal loss from metal structures which can be significant.

Phase ShiftUser selectable (network models only) at 0° or 90° between outputs

ADDITIONAL FUNCTIONS

StatusTri-colour LED: Solid Green = normal operation Flashing Green = sleep mode Flashing Amber = standby Flashing Red = error Fast Flashing Amber = firmware update

PHYSICAL

SizeFull width 1U 19″ rack mount. Width 430mm Depth 190mm Height 44mm Depth inc. knob 190mm (C5/C7) 305mm (C10/C14)

Mounting OptionsFreestanding Options 1U 19″ rack mount (brackets fitted as standard) Wall mounted, brackets available separately

EnvironmentIP20 rated; 20 to 90% relative humidity; 0 to 35ºC

CoolingC5/C7 Passive. C10/14 variable speed fan, front inlet rear exhaust.

Trykk ENTER for å søke