Sound1.com
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

MarkBass NANO MARK II

Art.nr: 162208
6.460,-
Antall:

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

MarkBass
Leverandørlager. 5-7 virkedager til lager.
Unbelievable tone and power-to weight ratio!
The NANO MARK II has evolved from our Nano Mark 300 amplifier, adding many useful features.
It keeps the same powerful sound in an ultra-compact size and same lightweight package of its
famous predecessor (only 3.20lbs/1.45 kg). The new bi-band limiter featured on this amp responds
faster and more dynamically to your playing, giving a more natural sound. Plus, thanks to an
optional single footswitch you can easily have access to a scooped-mid EQ setting and quickly
get a tight tone for slap or pick bass!
 
Power-to-weight ratio / ultra-portable amp
NANO MARK II is a professional grade amp weighing only 3.20 lbs / 1.45 kg and has an unbelievable
power-to-weight ratio with 300W from its MPT power amp in a remarkably small and lightweight package.
This amp is perfect for bassists searching for portability without sacrificing the rich and warm tones
unique to Markbass.
 
Simple design
This amp is ideal or those who need a myriad of tone shaping on the go. Thanks to its simple and effective
controls you can get a clear, loud, defined EQ resulting in an authentic reproduction of your bass guitar's
sound. Scooped-mid EQ ideal for slap and pick bass tones are available using an optional single footswitch
connected to the dedicated input on the rear panel.
 
Bi-band limiter
Our new bi-band limiter responds faster and more dynamically to your playing than traditional limiters do
and lets your high end "breathe" for a more natural sound. It makes our amp heads the best choice for anyone
who enjoys a quick, punchy attack at high volumes.
 
MPT - MARK PROPRIETARY TECHNOLOGY
Many other bass amps on the market use power amps that are not specifically designed for bass. At Markbass,
Marco De Virgiliis invested heavily in R&D to develop a proprietary power amp technology in house. When
compared against the competition, all Markbass amps feel unique, with a more defined sound and more power.
Our MPT power amp was built from the ground up to respect and elevate the inherent tone of your instrument.
 
XLR Out, Pre/Post EQ, FX send/return, Footswitch
A balanced XLR Line Out with Pre/Post EQ and GND Lift switches, effect send and return, Footswitch input
and quarter inch/Speakon speaker output - truly a feat of engineering - even we find it hard to believe
all of these fit in such an ultra-small head.
 
INPUTS
  • INPUT impedance: 1 Mohm, max. voltage: 15 Vpp
  • RETURN impedance: 33 Kohm, max. voltage: 10 Vpp
 
CONTROLS
  • GAIN –60 dB to +23 dB range
  • PRE/POST EQ (for line out) switch on rear panel
  • GROUND LIFT switch on rear panel
  • FOOTSWITCH (not included) for flat/scooped switch
  • MASTER VOLUME
EQUALIZATION
  • LOW: center frequency 60 Hz; level: ±16 dB
  • MID LOW: center frequency 360 Hz; level: ±16 dB
  • MID HIGH: center frequency 800 Hz; level: ±16 dB
  • HIGH: center frequency 5 kHz; level: ±16 dB
OUTPUTS
  • SEND EFFECTS: unbalanced, max. voltage 20 Vpp (Pre Eq)
  • LINE OUT balanced XLR, Maximum Voltage 10 Vpp, Impedance 600 ohm
  • SPEAKER OUT: speakon/1/4” combo
DIMENSIONS AND WEIGHT
  • WIDTH: 7.87 in. / 20 cm
  • DEPTH: 8.27 in. / 21 cm
  • HEIGHT: 2.09 in. / 5.3 cm
  • WEIGHT: 3.20 lbs / 1.45 kg
OUTPUT POWER: 300W RMS @ 4 ohm, 150W RMS @ 8 ohm 
 
POWER REQUIREMENT: 100/120V; 230V; 240V  50/60Hz (Voltage is factory preset according to region of sale)
 
OTHERS
  • BI-BAND LIMITER
  • FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID

Trykk ENTER for å søke