Martin Audio CDD15-WR kraftig værbestandig høyttaler

Art.nr: 8729837

35.750,-

Antall:

Du vil motta en e-post så snart produktet er på lager!

En ukjent feil har oppstått. Prøve igjen

Martin Audio

Bestillingsvare. 7-8 dager til lager.

Informasjon
Produsent

Martin Audio CDD15-WR kraftig værbestandig høyttaler

CDD15-WR er et svært kraftig, værbestandig, passivt toveissystem designet for utendørs installasjoner som krever det ultimate innen lydytelse fra et enkelt kabinett og egnet for applikasjoner der det vil være underlagt skiftende miljøforhold, men skjermet fra direkte eksponering for elementene.

CDD15 er ideell for middels til store rom, og er et passivt toveissystem med svært høy effekt designet for installasjoner som krever det ultimate innen lydytelse fra et enkelt kabinett. Den kombinerer svært høy utgangskapasitet med eksepsjonell troskap og dekningskonsistens. Dens koaksiale drivenhet består av en kraftig 15” (380 mm)/3” (75 mm) talespole LF-driver og en 1,4” (35 mm) utgangs-HF-kompresjonsdriver med en 3” (75 mm) ren titanmembran. CDD15-WR-alternativet gir værbeskyttet beskyttelse.

Features

Compact, CDD™ passive two-way system
Coaxial Differential Dispersion™ technology
Elegant UPM Formi composite enclosure
Outdoor operation when sheltered from direct exposure to elements
Operating temperature -20°C to +70°C
Environmentally tested to meet IP54
User-rotatable coaxial drive unit
Vertical and horizontal mounting options
Screw-free water and particle resistant grille
8Ω nominal impedance
Integral inserts for eyebolt suspension
Black or white standard colour options

Applications

Live sound reinforcement
Theatre sound
Corporate AV events
Fixed installations in concert halls, ballrooms and HoW
?
Bars and clubs

Acoustics

TYPE High-output, Coaxial Differential Dispersion powered two-way system
FREQUENCY RESPONSE (1) 55Hz – 20kHz ±3dB, -10dB @ 45Hz
DRIVER LF: 15” (380mm)/3” (75mm) voice coil, long excursion, shared ferrite motor system with HF
HF: 1.4” (36mm) exit/3” (75mm) voice coil, titanium dome compression driver
INPUT SENSITIVITY -30dBu for 100dB SPL
MAXIMUM SPL (2) 126dB continuous / 132dB peak
DISPERSION 100°-60° horizontal, 60° vertical (user-rotatable)
CROSSOVER 1.5kHz Active LR8 with low latency HF FIR equalisation, Balance presets for pole mount/ pole mount with sub/ stage monitor

Module Audio input

CONNECTORS Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon
ANALOGUE INPUT IMPEDANCE 20 kO balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL 24.6 Vpp (+21dBu), over voltage protected
INTERNALPROCESSING Multi-channel DSP, programmable via TCP/IP using VU-Net software, PEQ/shelving filters, Up to 48dB/Oct HPF, Low latency HF FIR filters, Up to 200ms input delay, Pre-set selection via rear panel switch

Network

CONNECTORS 2xNeutrik® Ethercon
PROTOCOL TCP/IP and UDP/IP

Amplifier

TYPE 2 channel switch-mode, class D,, Bridged Tied Load + 1 channel switch-mode, class D
PEAK OUTPUT POWER 2500W total, 2000W LF, 500W HF
AVERAGE EFFICIENCY 89%
COOLING External convection cooled, with internal fan
MAXIMUM AMBIENT TEMPERATURE 40°C (104°F) for full output

Power Supply

TYPE Switch mode, fixed frequency with PFC
AC INPUT OPERATING RANGE 85 – 265V ~ AC, 50 - 60Hz
POWER FACTOR > 0.98
NOMINAL POWER CONSUMPTION 160W
MAINS CONNECTOR Neutrik® Powercon True1

Mechanical

ENCLOSURE Extensively braced multi-laminate plywood.
FINISH Textured black PU coating.
PROTECTIVE GRILLE HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black grille cloth.
FITTINGS Top hat for pole mounting, 15 x M8 mounting points, Two side pocket handles, Optional weather protection cowl
IP RATING IP24 factory option available
DIMENSIONS (W) 427mm x (H) 696mm x (D) 422mm
WEIGHT 37kg (81.4lbs) excluding Transit cover
ACCESSORIES Transit Cover, Optional yoke and universal brackets