Sound1.com
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Crown XTi 1002 forsterker, 2 x 500W i 4ohm

Art.nr: 740-02000
7.450,-
Antall:

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Crown
Leverandørlager. 5-7 virkedager til lager.

Key Features

  • Peakx Plus™ limiter gives superb quality with control of attack, release, and threshold
  • System monitoring and locking power connector give total peace of mind at gigs
  • Subharmonic synth section lets you easily add extra bass and get the audience moving
  • Impressive 500 watts of power output at 4 ohms, enough for many venues

Total peace of mind whenever you engineer

You need to know the status of your system to make sure nothing is going wrong. The Crown XTi1002 gives you thorough system monitoring tools so you always know the AC line voltage and power supply temperature.

Be prepared, even if disaster strikes. The locking power cord clip ensures a totally stable power supply, even if your rack gets knocked over or moved. With the innovative Peakx Plus™ limiter you can also be totally safe from clipping.

Software control for perfect detail

Every aspect of your sound is just a few clicks away. The free HiQnet Audio Architect software lets you take control of every setting on the amplifier. Perfect your limiting and maintain transient response by editing the threshold, attack, and release of the Peakx Plus™ limiter.

Cater to any combination of inputs and outputs by easily switching between bridged, stereo, and Y input modes. Perfect your sound on any system - EQ and crossover settings are all available in the software.

Features

  • Peakx Plus Limiters for full control over threshold, attack & release
  • Enhanced subharmonic synth with user control over frequency, gain and filter type
  • 3 user-defined fan mode controls
  • New system monitoring
  • Integrated cast-aluminum handles
  • Locking power cord clip
  • Updated HiQnet System Architect control software
  • Increased number of presets with 49 of which are user definable

Specifications

  • Channels: 2
  • Sensitivity: 1.4V
  • Rated Power Output (Per Channel): 700W 2Ω, 500W 4Ω, 275W 8Ω
  • Signal-To-Noise Ratio (Below Rated 1kHz Power At 8Ω): 100 dB (A-Weighted)
  • THD: <0.5 Percent
  • Frequency Response (At 1W, 20Hz - 20kHz): +0 dB, -1 dB
  • Crosstalk (Below Rated Power) 20Hz to 1kHz: >70 dB
  • Input Impedance: 20kΩ Balanced, 10kΩ Unbalanced
  • Voltage Gain (At 1kHz, 8Ω Rated Output): 30.5 dB
  • Maximum Input Signal: +22 dBu Typical

Construction

  • Ventilation: Flow-Through Ventilation From Front To Back
  • Cooling: Heat Sinks and Proportional-Speed Fan
  • IEC Power Connector: 15A
  • Weight: 8.4 kg

Dimensions

  • Height: 89 mm
  • Width: 483 mm
  • Depth: 311 mm

Trykk ENTER for å søke