QSC E115 500/2000W

QSC E115 500/2000W The E115 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered. E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.  Features High output, professional quality sound with E115 – 500 W continuous power E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers. Titanium diaphragm for high fidelity and long life Rugged tour-grade textured paint Foam-lined perforated steel grill Available U-Style Yoke and M10 rigging kit for permanent installation Dual angle pole socket Model    E115 Configuration    1 × 15-inch, 2-way, non-powered  Frequency Response (-6 dB)    55 Hz – 20 kHz Frequency Range (-10 dB)    43 Hz – 20 kHz Power capacity(1): continuous/peak    500 W / 2000 W Sensitivity    97 dB, 1 W @ 1 m Coverage Angle    75° conical DMT™ Output(2) (peak SPL @ 1 m)    130 dB Drivers LF - 381 mm (15 in) driver with 89 mm (3.5 in) voice coil HF - 38 mm (1.5 in) exit, 71 mm (2.8 in) voice coil, compression driver  Nominal Impedance    8Ω Cross-over    Full-range only 1.55 kHz  Input connectors    2 × NL4, 1 × barrier strip Enclosure    Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining. Speaker Dimensions (W×H×D)    420 × 716 × 445 mm 16.5 × 28.2 × 17.5 in Carton Dimensions - (W×H×D)    530 × 510 × 813 mm 21 × 20 × 32 in Net speaker weight    31 kg / 68 lb Shipping weight    35.4 kg / 78 lb (1) Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct. (2) With QSC Processing *Specifications are subject to change without notice.